Emptying The Dirty Water Tank - Bissell POWERFORCE POWERBRUSH PET 2910 Serie Manual Del Usuario

Cleaning Your Carpet
(continued)
4.
Make cleaning passes. Repeat these passes until solution being pulled up appears clean. Empty
the Dirty Water Tank and refill the Clean Water Tank as needed.
1. Hold Spray Trigger
• 1 pass forward
• 1 pass back

Emptying the Dirty Water Tank

For maintenance how-to videos, visit support.BISSELL.com.
1.
Turn OFF and unplug your
machine.
4.
Lift tab on the top of the
tank.
IMPORTANT
» Please check manufacturer's tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep
cleaning delicate, silk, wool, antique, or area rugs without a manufacturer's tag.
» Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature
belt failure.
2. Release Spray Trigger
• 1 pass forward
• 1 pass back
2.
Release Dirty Water Tank
by pulling out and up on the
latches on the side.
5.
To empty, pour out dirty
water using opening at back of
tank. Rinse the tank thoroughly.
Reinsert tab into tank.
3.
Carefully remove tank by
lifting up on the Dirty Water
Tank Handle.
6.
To continue cleaning, align
the bottom of the tank to the
base and secure into place
with latches.
BISSELL.com 5