Jpeg File Playback; Playing Back Still Images In Sequence; Playing Back Still Images In A Selected Folder; Playing Back Slide Show - Pioneer BDP-120 Manual De Instrucciones

JPEG File Playback

CD-R CD-RW
JPEG JPEG
NOTE
• This Player can play still images (JPEG files) that have been
recorded on CD-RW/R discs. For details on the still images
that you can play using this player, refer to "About the
JPEG file format" on page 7.
• During "Normal play", still images are played one by one
while during "Slide show", they are automatically replaced
one after another.

Playing back still images in sequence

1
Load the disc containing the still images, and
press  PLAY.
• The first still image appears on the screen.
• Pressk orl to proceed to the
next or previous still image.
The same operation can be performed by pressing
 or  REV/ FWD.
2
To stop the still image playback at any time,
press  STOP.
Playing back still images in a
selected folder
1
Load the disc containing still images, then press
HOME MENU.
Press  to select "Picture", then press
2
ENTER.
Use  to select the folder whose still
3
images are to be played, then press ENTER.
8/15
• When seven or more folders are displayed, switch
pages by pressing PAGE +/-.The same operation
can be performed by pressing k or
l.
4
Pressk orl to replace one
image with another.
• The same operation can be performed by pressing
 or  REV/ FWD.
• Press RETURN if you wish to return to the folder
selection screen.
5
To stop the still image playback at any time,
press  STOP.

Playing back Slide Show

1
In Step 2 of the left side "Playing back still
images in a selected folder", press  PLAY
(Slide Show).
• The still images inside the selected folder are played
as a slide show.
2
To pause the playback at any time, press
 PAUSE.
Press  PLAY to resume playback.
•
3
To stop the play at any time, press  STOP.
• Press RETURN to play a slide show of still images
in another folder.
Setting slide show speed/repeat
playback
1
Press BLUE (Slide Show Menu) during the folder
selection screen.
• The setting screen for "Slide Show Speed"/"Repeat
Mode Setting" appears.
Press  to select "Slide Show Speed", then
2
press ENTER.
Slide Show Speed
Repeat Mode Setting
• The slide show speed may be selected from "Fast",
"Normal", "Slow1" and "Slow2".
Press  to select the desired speed, then
3
press ENTER.
4 Press  to select "Repeat Mode Setting",
then press ENTER.
Slide Show Speed
Repeat Mode Setting
Press  to select the desired item, then
5
press ENTER.
6
Press EXIT to exit.
Normal
Yes No
33