Dear Customer,
Thank you for choosing one of our products. Our name stands for high-quality, thoroughly tested
products for the applications in the areas of heat, weight, blood pressure, body temperature, pulse,
gentle therapy, massage and air.
Please read these instructions for use carefully and keep them for later use, be sure to make them
accessible to other users and observe the information they contain.
Best regards,
Your Beurer Team
1. Important safety information –
read carefully and keep for later use
Failure to observe the information provided below can lead to personal injury or material damage
(electric shock, skin burns, fire). The following safety and hazard information not only serves to
protect your health and the health of others, it also protects the product from damage. Therefore,
observe this safety information and pass on these instructions together with the product.
• Only use this footwarmer for the purpose described in the instructions for use.
• This footwarmer is not intended for use in hospitals.
• This footwarmer is not intended for use by persons (including children) with restricted physi-
cal, sensory or mental capabilities and/or by persons lacking the required understanding of the
equipment and how it is used, unless they are supervised by a person who is responsible for their
safety.
• Do not use for helpless persons, small children, persons insensitive to heat (e.g. diabetics, per-
sons with illness-related skin changes or scarred skin areas in the application area, after consum-
ing medications or alcohol).
• Do not use the footwarmer on parts of the body which are inflamed, injured or swollen. If in doubt,
seek medical advice prior to use.
• Excessively long use can cause the skin to be burned.
• Caution! Never fall asleep while the footwarmer is in operation.
• The electric and magnetic fields emitted by this footwarmer can interfere with the operation of
pacemakers. However, they are far below the permissible limits: electric field strength: maximum
of 5,000 V/m, magnetic field strength: maximum of 80 A/m, magnetic flux density: maximum of 0.1
millitesla. Therefore, please ask your doctor and the manufacturer of your pacemaker before using
this footwarmer.
• This footwarmer
– is only to be connected to the voltage specified on the appliance,
– is not to be operated without supervision,
– is not to be switched on when folded or compressed,
– is not to be pinched between objects,
– is not to be bent sharply,
– is not to be used with animals,
– is not to be used when damp.
• Only use in dry surroundings.
eNGlISh
6