Sequence Playback; Manual Sequence Playback; Automatic Sequence Playback - Steren DMX-100 Manual De Instrucciones

3.8 Sequence playback

3.8.1 Manual sequence playback

This function allows the user to manually move between sequence steps (scenes).
1. Press and hold the PROGRAM button for 3 seconds to enter the programming
mode.
2. Run a sequence by pressing any of the CHASE buttons
3. Press TAPSYNC/Display to manually move between scenes.
4. Use BANK buttons to move through the sequences.
5. Press and hold the PROGRAM button for 3 seconds to exit programming mode.

3.8.2 Automatic sequence playback

1. Press any of the CHASE buttons.
2. Press and release the AUTO/Del button. The corresponding LED will turn on.
3. Adjust the SPEED and FADE TIME controls to your liking.
0
ME
4. You can change the speed and transition by simply
clicking the Tapsync/Display button three or four times at the
desired pace. The sequence shall be according to the interval
of keystrokes.
17