Delete A Scene (Step) Of A Sequence (Chase) - Steren DMX-100 Manual De Instrucciones

5. Use the BANK UP/DOWN buttons to change the scene until you reach the step in
which you want to add or add a new scene.
6. Press the Midi/Add button and a number of step will be added to the number of
previously shown step.
7. Click the scene button to select the scene which will be copied.
8 Press the Midi/Add button again to add another step.
9. Press and hold the PROGRAM button for 3 seconds to exit programming mode.

3.5.4 Delete a scene (step) of a sequence (Chase)

1. Press and hold the PROGRAM button for 3 seconds.
2. Press the CHASE (1 to 6) which contains the scene you want to delete.
0
ME
6. Press and hold the PROGRAM button for 3 seconds to exit programming mode.
Remember that we use the terms "scene" and "step" without difference.
14
3 Press the button TAPSYNC/Display and the screen LCD will
show the steps.
4. Select the scene/step that you want to delete using the BANK
UP/DOWN buttons.
5. Press the AUTO/DEL button to delete the scene/step.