10.6. INCORRECT USE OF THE MACHINE
The machine was designed with the intention for
professional use only.
Any other use may cause damage to the machine
and/or create dangerous situations for which the
manufacturer can't be held responsible.
In particular:
The use of solvents containing chlorides or fluorides
of carbon and substances with a base of allogeneic
hydrocarbons is expressly prohibited.
In addition, the machine must not be used for
washing or greasing of objects designed to come into
contact with foodstuffs.
National laws regarding the use and disposal of
products used for cleaning and washing parts must
be observed, as well as the elimination of the machi-
ne itself.
10.7. GENERAL SAFETY AND ACCIDENT
PREVENTION
This machine must have as its primary objective for
the sole purpose for which it was expressly designed.
The manufacturer can't be held responsible for any
damage to people, animals and objects caused by
improper, erroneous or unreasonable use of the
machine.
Disconnect the air supply to the machine before
performing any cleaning or maintenance.
In case of failure and/or malfunction of the machine,
turn off, not directly intervene; consult a service
center authorized by the manufacturer and use only
original spare parts.
The user is obliged to check the right environmental
conditions (For example, low temperatures or high)
where the machine is located, which may affect
performance and/or severely damaged.
The use of equipment with an open flame or welders
or manipulate incandescent materials near the S25 is
expressly prohibited
National laws regarding the use and disposal of
products used for cleaning and washing of the parts
must be observed, as well as dismantling the S25
washing machine.
10.8. ECOLOGY
The S25 shouldn't be used for cleaning or degrea-
sing objects destined to be in contact with food.
Should be respected the laws concerning the use of
products used in cleaning and washing parts and the
equipment S25.
- 20 -