Cidco Communications D936 Manual Del Usuario página 21

D936-937.book Page 10 Friday, August 30, 2002 10:24 AM
D936/D937 - 900MHz Cordless
Voicemail systems operate differently and some require
additional pauses to be entered. After setting up the
Voicemail access number, the screen prompts:
-VMAIL SETUP-
DIAL PASSWORD
XX SECONDS LATER
1=MORE 2=LESS
Pressing 1 adds 3 seconds of pause. Pressing 2 reduces the
pause by 3 seconds. After the appropriate pause has been
added/removed, press SAVE. Three to six seconds of
pause is suggested and the default is 6 seconds.
-VMAIL SETUP-
ENTER PASSWORD
AND # IF NEEDED
Enter your password then press SAVE. If you normally press
a # after entering your password, add it to the end of your
password here too.
NEED TO KNOW
To change an existing voicemail access number and/
or password, repeat the steps for Voicemail Setup.
When the access number and/or password that
needs to be modified is displayed, use the delete key
to erase the original number/password. Enter the
new number/password and continue following the
setup instructions.
10 FEATURES AND CONTROLS
S D M
ELECTING A IALING ETHOD
The D936/D937 dials in either tone or pulse/rotary mode.
To select the dialing method, press MENU / EXIT. Using the
REVIEW key, scroll through the options until the arrow
DIAL METHOD
is next to and press SELECT (or press 5).
-DIAL METHOD-
1=TONE
2=PULSE
CURRENTLY TONE
Press the number for the desired dialing method or press
MENU / EXIT to leave as is.
C V L
LEAR OICEMAIL IGHT
To clear the voicemail light, press MENU / EXIT. Using the
REVIEW key, scroll through the options until the arrow
CLEAR VM LIGHT
is next to and press SELECT (or press
6). See "Clearing the Voicemail Light" on page 15 for
additional information.
CWID O S
PTIONS ETUP
Call Waiting ID (CWID) options allow you to disposition
incoming calls when you are on another call. Feature may
not be available in all areas. Contact your local phone
company.
NEED TO KNOW
Caller ID, Call Waiting ID and Call Waiting ID (CWID)
options are required from your local telephone company.
Please contact your local telephone company to activate
these services.