Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-5832G
Ford Transit 2015-up
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Radio trim panel is painted gray
KIT COMPONENTS
• A) Radio trim panel • B) Dash panel • C) Radio brackets • D) Pocket • E) Airbag light blank
• F) (4) #8 x 3/8" Phillips truss head screws • G) (2) #8 x 3/8" Phillips pan head screws • H) (3) Metal "U" panel clips
• I) (5) Metal "D" panel clips • J) (4) Small metal "D" panel clips • K) (4) Plastic panel clips
A
B
F
WIRING & ANTENNA CONNECTIONS (sold separately)
Wire harness: • 70-5524 Antenna adapter: • 40-EU10
METRA. The World's best kits.
(without 4.2" screen)
99-5832G
C
D
G
H
I
®
E
J
K
metraonline.com
Table of Contents
Dash Disassembly ..................................................2
Kit Preparation ........................................................2
- ISO DIN radio provision with pocket ....................... 3
- ISO DDIN radio provision ....................................... 3
Final Assembly .......................................................3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-20 Torx screwdriver
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
Publicidad
Capítulos
Tabla de contenido
Manuales relacionados para Metra 99-5832G
Resumen de contenidos para Metra 99-5832G
-
Página 1: Tabla De Contenido
INSTALLATION INSTRUCTIONS FOR PART 99-5832G Table of Contents Ford Transit 2015-up (without 4.2” screen) Dash Disassembly ..........2 99-5832G Kit Preparation ............2 Kit Assembly – ISO DIN radio provision with pocket ....... 3 KIT FEATURES • ISO DIN radio provision with pocket –... -
Página 2: Dash Disassembly
99-5832G Dash Disassembly Kit Preparation 1. Unclip the dash panel above the 1. Secure the factory vents to the radio 3. Attach the (4) plastic panel clips radio. (Figure A) trim panel using the (2) #8 x 3/8” provided, to the radio trim panel. -
Página 3: Kit Assembly
2. Remove the metal DIN sleeve and connections to the radio. Metra trim ring from the aftermarket radio. recommends using the proper (Figure A) 3. Slide the radio into the completed... -
Página 4: Important
INSTALLATION INSTRUCTIONS FOR PART 99-5832G IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. -
Página 5: Ford Transit 2015 Y Mas
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5832G Indice Ford Transit 2015 y mas (sin pantalla de 4.2 pulgadas) Desmontaje del tablero ..........2 99-5832G Preparación del kit ..........2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 CARACTERÍSTICAS DEL KIT... -
Página 6: Desmontaje Del Tablero
99-5832G Desmontaje del tablero Preparación del kit 1. Desenganche el panel del tablero 1. Atornille las rejillas de fábrica al panel 3. Instale los (4) ganchos de plástico del encima del radio. (Figura A) de moldura del radio usando los (2) -
Página 7: Ensamble Del Kit
Phillips. (Figura A) en el tablero y realice todas las conexiones necesarias al radio. Metra 2. Quite la manga de metal DIN y recomienda el uso de adaptadores (Figura A) -
Página 8: Importante
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5832G IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones.