CTEK MUS 4.3 POLAR Manual página 9

ERROR LAMP
If the error lamp is lit, check the following:
1. Is the chargers positive lead connected
to the battery´s positive pole?
2. Is the charger connected to a 12V
battery?
3. Has charging been interrupted in
STEP 1, 2 or 5?
Restart the charger by pressing the MODE-
button. If charging is still being interrupted, the
battery...
STEP 1: ...is seriously sulphated and may need
to be replaced.
STEP 2: ...cannot accept charge and may need
to be replaced.
STEP 5: ...cannot keep charge and may need to
be replaced.
MODE
20018878A MUS 4.3 Polar, Manual, Print file_001.indd 11
POWER LAMP
If the power lamp is lit with a:
1. STEADY LIGHT
The mains cable is connected to the wall socket.
2. FLASHING LIGHT:
The charger has entered the energy save mode. This
happens if the charger isn´t connected to the battery
in 2 minutes.
READY TO USE
The table shows the estimated time for empty battery to 80%
charge
BATTERY SIZE (Ah)
2Ah
8Ah
20Ah
60Ah
110Ah
TIME TO 80% CHARGED
2h
8h
4h
12h
26h
EN • 11
2013-01-15 16:29:17