Metra AXXESS LC-CHRC-01 Instrucciones De Instalación

Chrysler Data Interface 2013-up
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified models, or when bypassing a factory amplifier
• Fiat 500L only: For use in both amplified and non-amplified systems
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
• Retains the factory backup camera (if displayed through the OE radio)
• Retains the 3.5mm AUX-IN jack
• Retains balance and fade
• Retains safety chimes
• Micro "B" USB updatable
CHRYSLER
200 LX 2015-up
DODGE
Dart (small screen option)
2013-up
Axxess Integrate
Installation instructions for part LC-CHRC-01
LC-CHRC-01
INTERFACE FEATURES
APPLICATIONS
FIAT
500L 2014-up
500X 2016-up
JEEP
Cherokee Sport 2014-up
Renegade 2015-up
axxessinterfaces.com
RAM
1500/2500/3500 (small screen
option) 2013-up
Chassis Cab 3500/4500/5500
(small screen option) 2013-up
Promaster 2014-up
Promaster City 2015-up
•
metraonline.com
TABLE OF CONTENTS
Connections to be made ................................................... 2
Installing the LC-CHRC-01................................................ 3
Initializing the LC-CHRC-01 .............................................. 3
INTERFACE COMPONENTS
• LC-CHRC-01 interface • LC-CHRC-01 harness
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION