Horizon Global 76438 Instrucciones De Instalación página 5

2. Clean weldnuts: Using flat head screwdriver, remove plastic rivet covering on the weldnuts, (3) per side. Using wire brush to clean the weldnuts if needed.
3. Install hitch: Raise the hitch into position and align it with weldnut location. Loosely install M12 bolts ①, ½'' conical washers ②, ½'' lock washers ③, and ½'' flat washers ④
to the hitch, as shown in Figure 1.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 18 76438NP 02-01-21 Rev. A