Horizon Global 76438 Instrucciones De Instalación página 6

4. Tighten all M12 fasteners with torque wrench to 76 Ft.-Lb. (103 N*M).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
5. Trim underbody panel: Using utility knife and tape, mark and trim the panel as shown in Figure 2.
6. Reinstall the underbody panel with fasteners removed in step 1, except the rearmost two fasteners due to trimming.
8''
3''
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 18 76438NP 02-01-21 Rev. A