Horizon Global 76499 Instrucciones De Instalación página 5

5. Re-install exhaust hangers – Raise exhaust hangers into position,
install the bolts removed earlier and the nuts from the vehicle bumper
may be re-installed at this time or returned to the vehicle owner.
7. Re-install fascia - Reverse the process used in step 2 to re-install the fascia. Be sure to reconnect any plugs that were disconnected. The
hitch access panel may be replaced when hitch is not in use.
©2021 Horizon Global™ Corp - Printed in Mexico
6. Torque fasteners - Tighten all ½ GR5" fasteners with torque wrench to
75Lb.-Ft. (102 N*M) and all M10 fasteners to 38Lb.-Ft. (52 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when
.
towing
Sheet 5 of 21 76499NP 5-20-21 Rev. A