Horizon Global 76499 Instrucciones De Instalación página 6

3. Remove bumper and lower exhaust– Remove M10 nuts with a 15mm socket from the top bumper attachments, 2 each side, set nuts aside for re-
attachment. Remove M10 bolts with a 15mm socket from the bottom bumper attachments, 2 each side. Lower the exhaust for clearance. Be sure to
support the vehicle exhaust system to prevent damage. Return the bumper to the vehicle owner.
4. Install hitch – Raise the hitch into position, aligning the slots in the hitch with the attachment holes in the vehicle frame. Using the supplied pull wires
install the supplied carriage bolts and spacers into the vehicle frame, install the conical washers (teeth side toward hitch) and nuts onto the carriage bolts.
©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 21 76499NP 5-20-21 Rev. A