Hollywog WiTouch Pro Guia De Inicio Rapido

BLUETOOTH
Quick Start Guide
Box Contents
WiTouch Pro Bluetooth
®
Download, Install, and Connect the WiTouch Pro App
1. Download and install the WiTouch Pro app from the App Store or Google Play.
The app is compatible with iOS 9.0 and above, and Android 4.4 and above.
2. Using the included screwdriver, remove the battery cover and insert the
AAA batteries into the WiTouch Pro device. Replace the
battery cover.
3 Turn the device ON by pressing the ON/OFF button for
1 second. The green LED will begin flashing indicating
the device is in standby mode.
4
Press and hold the + and – intensity buttons
simultaneously for 3 seconds and the LED appears solid
green. The device is in pairing mode.
5 Launch the WiTouch Pro app and your smartphone will
search and automatically connect with the WiTouch Pro device.
6. A pairing success message will appear on the App, and your
WiTouch Pro Bluetooth TENS Therapy is now ready to use.
If pairing is unsuccessful, follow the instruction messages on your
App or refer to the user manual. Pairing instruction videos can also
be found at hollywog.com/pages/resources.
TENS THERAPY
®
#0 Phillips head
device (1)
®
must be turned on in your smartphone
settings to pair with the device.
manual for all Indications, Contraindications,
Warnings, Precautions, Adverse Reactions,
and directions. A detailed user manual with
instructions for use is available in the WiTouch
Pro App's information tab and for download at
hollywog.com/products/witouch. A printed copy
of the user manual can be requested
by contacting Hollywog at info@hollywog.com.
AAA alkaline
batteries (2)
screwdriver (1)
IMPORTANT! Refer to the user
Gel pads (1 pack of 3 pair)
3
4
5