Hollywog WiTouch Pro Guia De Inicio Rapido página 2

Apply the WiTouch Pro and Start a Treatment
1 Remove one (1) pair of gel pads and separate the two gel pads
2
Remove the blue liner and discard. Apply this adhesive side
of the gel pad to the device. Do not remove the green
protective liner.
3 Align the shape of the first gel pad with the black electrode
area of the device and firmly press across the entire surface.
Repeat steps 1 – 3 for the second gel pad.
4
Remove the green liners from the gel pads, slowly peeling the
liner diagonally from an inside corner to the opposite outside
corner. Save the green protective liners for storage of the device.
5 Make sure the device is ON.
The LED will flash green.
6 Align the center of the device over the
spine and place the device on your back
7
In the WiTouch Pro App, select a pain relief program and press
START. Adjust the intensity by pressing the + and - controls on
the App or device. Your 30-minute treatment will begin.
Need Help?
If you have a question or need assistance with your
WiTouch® Pro Bluetooth® TENS Therapy, contact us
at +1-423-305-7777 or info@hollywog.com.
Hollywog
100 Cherokee Blvd.
Chattanooga, TN 37405 USA
www.hollywog.com
U.S. Patents 9,764,133, 8,972,016, D712,052, D716,958.
International patents pending.
Made in USA
® and © 2020 Hollywog, LLC. All rights reserved. The Bluetooth®
word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Hollywog, LLC is
under license. Other trademarks and trade names are those of their
respective owners.
5
11S.1100A 06/23/2020
1
2
3
4 4
6
7