Factory Reset - Dimplex CX-MPC Manual Del Propietário

Program Schedule Set up
either side of the temperature
setting, set the temperature
for the Wake event to adjust
to.
10. Press the
11. Repeat steps 2-10 for each
of the other events - away,
Home and sleep.
! NOTE: There is a blank setting
table at the back of this manual to
assist with ensuring that all of the
required events and zones have
been set up to the desired times
and temperatures.

Factory Reset

If the programmed settings need
to be adjusted significantly, it is
possible to Reset the controller
back to the Factory settings.
1. Press the
2. Press and hold the
icon for 10 seconds.
The unit will return to the initial
set up screen. This is the same
as removing the battery strip after
unpacking.
icon.
icon.
11