1
Pos.
3. Luftutslipp
4. Luftinntak
1. Spennhylse
5. Turtallsregulator
2. Sikkerhetspådrag
Norsk
Art.nr.
Luna................................................................................
For skaftdiameter..............................................mm/tom
Turtall....................................................................o/min
Lydnivå (EN ISO 15744:2002)...........................dB (A)
Vibrasjon (EN 28662-1)..........................................m/s²
Anbefalt slangedimensjon........................................tom
Koblingsgjenge .....................................................G (R)
Luftforbruk ved 100% int.* ...................................l/min
Luftforbruk ved 40% int.*...................................l/min
Luftforbruk ved 100% int.*........................................l/s
Luftforbruk ved 40% int.* .......................................l/s
Effekt ..........................................................................W
Lengde......................................................................mm
Vekt.............................................................................kg
Tilbehør:
Spennhylse 3 mm ........................................................... 20026-0503
Spennhylse 6 mm ........................................................... 20026-0602
Spennhylse 8 mm ........................................................... 20026-0651
Spennhylse 1/4".............................................................. 20026-0701
*Ved 6.2 bar
5
3
2
20026-0107
20027-0106
20250-0104
ADG20-HP
ADG12-90HP
ADGE18-HP
3 / 6 / 1/4
3 / 6 / 1/4
3 / 6 / 8 / 1/4
20,000
12,000
20,000
85
89
1,2
1,7
3/8
3/8
1/4
1/4
320
320
128
128
5,3
5,3
2,1
2,1
750
750
208
232
1,0
1,0
20026-0503
20026-0503
20026-0602
20026-0602
20026-0651
20026-0651
20026-0701
20026-0701
50
A easy handle, strong, high speed die grinder in straight and 90° performance respectively. Built
for grinding sticks and rotating files. Suitable for service and maintenance works. Rear air out-
let (Pos. 3) through the handle, reducing the risk of getting dust particles blow in the face of the
user. The speed can be adjusted by use of the regulator (Pos. 5). The tool is equipped with safe-
ty lever (Pos. 2), which prevents unintentional start-up of the tool and automatically returns to
the initial position after release of the lever. The swivelling air inlet (Pos. 4) makes it more easy
4
to work with the machine when it avoid the air hose to get twisted. Supplied as standard with
two fixing spanners plus 3 and 6 mm and 1/4" adapters (Pos. 1).
• User of the tool should always take care of his and other persons' safety. The user must always
use personal protective equipment.
• Wear safety goggles, in order to reduce risk of eye injuries that could be caused by flying saw-
dust, dust and sparkles.
• Inhalation of dust can be harmful to health. Wear a suitable visor or breathing apparatus, when
working in a dusty environment.
• In case of continuous work wear safety gloves protecting against the cold air.
• In order to avoid eventual aural injuries, always use ear protection when using the tool.
• The user must always pay attention to the fact that continuous use of rotating and impact pro-
ducing manual tools could result in baneful influence on health caused by the vibration.
• Ergonomic load: Work with the tools related to recurrent, monotone movements and uncom-
fortable body positions may cause back, scruff, arm, knee and other joint injuries.
90
0,4
3/8
1/4
320
128
5,3
2,1
750
330
1,1
Description
Health hazards
27