Homologación Culus, Hazardous Location - Siemens S7-400 Manual De Producto

Homologaciones
Homologación cULus, Hazardous Location
CULUS Listed 7RA9 IND. CONT. EQ. FOR HAZ. LOC.
Underwriters Laboratories Inc. según
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Pocess Control Equipment)
● ANSI ISA 12.12.01, CSA C22.2 No. 213-M1987
● CSA–213 (Hazardous Location)
APPROVED for Use in
● Cl. 1, Div. 2, GP. A, B, C, D T3...T6
● Cl. 1, Zone 2, GP. IIC T3...T6
Consulte la clase de temperatura en la placa de características del módulo.
Explosion Hazard -
Do not disconnect while circuit is live unless area is known to be non hazardous.
Explosion Hazard -
Substitution of components may impair suitability for Class I, Division 2.
Nota
This equipment is suitable for use in Class I, Division 2, Group A, B, C, D or non-hazardous
locations only.
Nota
For devices with C-PLUG memory: The C-PLUG memory module may only be inserted or
removed when the power is off.
Nota
La instalación debe estar construida de acuerdo con las especificaciones del NEC (National
Electrical Code).
Para el uso en entornos que equivalen a Class I, Division 2 (v. arriba), los CPs S7 SIMATIC
NET se tienen que montar en una carcasa.
Homologación FM
Factory Mutual Approval Standard Class Number 3611,
Class I, Division 2, Group A, B, C, D, T3...T6 or
Class I, Zone 2, Group IIC, T3...T6.
60
UL 1604 (Hazardous Location)
ADVERTENCIA
Manual de producto, 07/2013, C79000−G8978−C299
CP 443-1 RNA