Faucet Installation - BLACK&DECKER Price Pfister ASHFIELD 42-YP Serie Guia De Inicio Rapido

Thank you for purchasing this Price Pfister product. All Price Pfister products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238)
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price
Pfister recommends calling a professional if you are uncertain about installing
this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the old faucet from the sink and clean the sink surface
thoroughly.
3
3 TOOLS RECOMMENDED
•Plumber's putty •Slotted screwdriver
•Pliers •Adjustable wrench
•Cloth •PTFE Plumber's Tape
Your installation may require new supply lines and / or shut-off valves or other
additional tools.
4
A
B
K
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are
included.
A Faucet D Base Plate
B Lift Rod E Deckplate
C Base Ring F Putty Plate
If any of these items are missing, please contact Price Pfister Consumer
Service at 1-800-Pfaucet (1-800-732-8238).
•Philips head screwdriver
•Flashlight
C
D
E
F
G
H
G Metal Washer K Pop-up Assembly
H Long Nut
ENGLISH

FAUCET INSTALLATION

5
5D
5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING
Ensure that Base Plate (5C) is pressed onto Base Ring (5A). Place a bead of
plumber's putty in the groove along the bottom outer edge of Base Plate (5C).
Assemble Base Plate and Base Ring to Faucet Body (5B). From above sink,
insert Threaded Shank (5D) and Flexible Tubing (5E) through hole on sink.
6
6 INSTALLING FAUCET WITH DECKPLATE
Ensure that the Plastic Putty Plate (6A) is pressed on the Deckplate (6B). Place
a bead of plumber's putty in the groove along the outer edge of the Putty Plate
(6A). Assemble Deckplate (6B) and Putty Plate (6A) to Faucet Body (6C). With
the handle and spout facing forward, carefully install the Faucet Supply Hoses
(6D) through the center hole of sink (6E).
2
5B
5A
5C
5E
6C
6D
6B
6A
6E