Digital/AnalogueMode - Speedlink RACING WHEEL Instrucciones De Manejo

System requirements:
• IBMPC
• Windows98orhigher
• FreeUSBport
• 0MBfreeharddiskspace
ConnecttheUSBconnectortotheUSBportonyourPC.
Driver installation for Windows 98 and higher
1. ThesteeringwheelmustbeconnectedtothePCbeforeinstallingthedriver.
InsertthesupplieddriverCDintoyourCD-ROMdrive.
. Iftheinstallationmenudoesnotstartautomatically,clickonStart>Run>
BrowseandselectyourCD-ROMdrive.
3. Double click on the file setup.exe
4. If a window requesting a digital signature for Windows appears, acknowl-
edgethemessagetocontinueinstallation.Followtheon-screeninstruc-
tions.
5. RebootyourPConcetheinstallationhascompleted.
Afterrebooting,selectStart>Settings>Control Panel.DoubleclickonGame
Controllers.Inthewindowthatopens,yoursteeringwheelshouldbelistedwith
status"OK".
ClickonPropertiestotestthesteeringwheel.
Itisnotnecessarytocalibratethesteeringwheel.Thesteeringwheelsup-
portsdynamiccalibration,whichtakesplaceautomaticallywhenplugginginthe
device.
Digital/Analogue mode:
ForPS ,youcanchoosebetweenanalogueanddigitalmodewiththissteer-
®
ingwheel.
To select a mode, press the mode button until you are in the required mode.
LEDdisplay
Note:
Withsomegames,suchasGT3™,thesteeringwheelonlyworksinanalogue
mode.Digitalmodeensurescompatibilitywitholdergames.
Digital mode
---
15
Analogue mode
Red
GB