Install The Blackmagic Design Software; Installing Blackmagic Desktop Video - Blackmagic Design H.264 Pro Recorder Manual De Instalación Y Funcionamiento

Install the Blackmagic Design Software

After installing your hardware, the next step is to install the Blackmagic Design Desktop Video
software. Please jump to the installation instructions for Mac OS or Windows in this section.

Installing Blackmagic Desktop Video

Mac OS Installation
Make sure you have administrator privileges before installing any software.
1 Ensure you have the very latest driver. Visit
2 Launch the Desktop Video Installer from the media included with your hardware or
from a downloaded disk image.
3 Click the 'continue', 'agree' and 'install' buttons to install the software.
4 Restart your computer to enable the new software drivers.
Desktop Video Installer for Mac
Automatic Updates
When your Mac restarts the software will check the internal software version of your hardware.
If the internal software version does not match the driver version, you will be prompted to
update the internal software. Click OK to start the update and restart your Mac to complete
the process.
Windows Installation
1 Ensure you have the very latest driver. Visit
2 Open the "Desktop Video" folder and launch the "Desktop Video" installer.
3
The drivers will now be installed on your system. An alert will appear: "Do you want
to allow the following program to install software on this computer?" Click 'yes'
to continue.
4 You will see a dialog bubble saying "found new hardware" and the hardware wizard
will appear. Select "install automatically" and the system will find the required Desktop
Video drivers. Another dialog bubble will appear saying "your new hardware is
ready for use."
www.blackmagicdesign.com/support
www.blackmagicdesign.com/support
Getting Started 6