Blackmagic Design HDLink Manual De Instalación Y Funcionamiento página 12

6 Channel Analog Audio Output
Valid video signals supported by HDLink Pro DVI Digital include 2K, HD1080,
HD720, NTSC and PAL. Computer video formats are generally not supported unless
they coincidentally match a TV format. HDLink can be used to monitor the output
of a Blackmagic Design DVI Extender in either Video or Extender (computer
resolution) modes. Detailed information is available in the DVI Extender manual.
Please see the following HDLink specifications link on the Blackmagic Design
CH1 CH2 CH3 CH4
website for a full listing of current formats supported via DVI and HDMI displays.
Check www.blackmagicdesign.com/products/hdlink/techspecs/
HDLink is preconfigured for you, requiring no initial setup to connect. Your HDLink will simply run
without changing any settings, however, if you would like to update the firmware, modify settings
or load custom gamma tables, then use the HDLink Utility software. This can be downloaded
from the Blackmagic Design web site support page. Check
HDLink Pro DVI Digital uses the same software as other HDLink models and shares the same
software interface for changing settings including 3D LUTs. 3D and 1D lookup tables can be
applied to the DVI/HDMI output of HDLink Pro DVI Digital. If HDLink Pro DVI Digital is
configured to send lookup tables to all video outputs, the lookup tables will be applied to the
SDI output in addition to the DVI/HDMI output.
DVI-D monitors are shown in most of the connection diagrams shown for this HDLink model. An
HDMI display can be used in all cases except for 2K monitoring as HDMI displays do not have
sufficient resolution to display a full 2K image. HDMI displays are best for use with HD720p50
as most DVI displays do not support this format. The included DVI-to-HDMI adapter can be
used to attach an HDMI display to the DVI output of HDLink Pro DVI Digital.
HDLink Pro DVI Digital provides two SDI inputs which can be used for standard definition SDI,
HD-SDI 4:2:2, Dual Link HD-SDI 4:4:4, 3 Gb/s HD-SDI 4:4:4 video or 2K film as shown in the
connection diagrams of this manual.
The consumer level analog audio outputs are fully compatible with a wide range of consumer
HiFi equipment and are perfect for monitoring of stereo audio or even up to 6 channels of
audio. 2 channel audio output via HDMI is provided for maximum compatibility with HDMI TVs
and monitors.
DVI-D
or HDMI
CH5 CH6 DVI-D or HDMI
SDI SDI SDI USB
In A In B Out
Input
3 Gb/s SDI monitoring for DVI/HDMI displays
SDI IN SDI OUT OPTICAL OUT/IN
www.blackmagicdesign.com/support/
HDLink Pro DVI Digital
Power
2.0 Input
12V
POWER 12V
12