Cequent REESE EXPLORE SportWing Hoja De Instrucciones página 4

Bicycle Loading Instructions
A. Determine the appropriate setting for the wheel hook assemblies by measuring the "center to center"
distance of the bike wheels.
B. Adjust the wheel hook assemblies to match the "center to center" bike wheel distance by inserting
them into the closest hole in the arm support.
C. Firmly tighten the T knobs to secure wheel hook in position.
D. Load the largest bike first on the vehicle side using the lower wheel hooks.
E. Start with front wheel, and hang from wheel hook.
F. Then mount the rear wheel on the opposite hook.
G. Secure both wheels by firmly attaching the rubber strap.
H. Use two (2) Hook & Loop straps to hold the bike frame to the bike carrier arm supports.
I. Load the second bike so that the handle bars are in the opposite direction of the first bike.
DISTANCE – BIKE WHEEL
CENTER TO CENTER
Instructions