Risks And Safety Information; Warning; Caution - bredent bwm 3 Manual De Funcionamiento Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Optional accessories
Foot pedal (for rapid heating)
Waxpool duo Contouring blade size 1
Waxpool duo Contouring blade size 5
Rest bwm 3

2. Risks and safety information

Signal word:
Described under Points 2.1 Warning and 2.2 Caution.
Important information is highlighted using the words „Warning" or „Caution".

Warning

Provides information concerning potential dangers, which could result in severe injuries or death if
ignored.

Caution

Provides information concerning potential dangers, which could result in injuries or damage to the
device if ignored.
2.1 Warning
Damaged device
Do not use a damaged device if, for example, the housing components, cable, handpiece or the mains
plug are damaged.
Improper use
 Do not heat up inflammable, explosive substances using the device!
 Do not operate or heat up in areas containing inflammable or explosive substances!
 Do not operate in areas with extreme air humidity (e.g.: steam jet, sink)
 Please do not use the device to warm up food, liquids or small live animals!
 Do not insert fingers into the device. Always unplug the mains plug first!
 Do not touch the mains plug with wet fingers, as this can lead to electric shock!
 Do not operate without work clothing or, if required, protective goggles and additional extraction
(vapours due to melted wax). The relevant regulations of the German employer's liability insurance
association apply.
The device must only be opened and repaired by an authorised member of the bredent service
team. Turn off the device and pull the main plug prior to that!
2.2 Caution
Positioning of the device
Always ensure that the device has sufficient ventilation, otherwise it may become overheated and
the service life may be impaired! The functioning of the device can only be guaranteed if the compo-
nents used are in perfect condition. The components are to be thoroughly checked each time, prior to
starting up the device.
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany · T: +49 7309 872-22
F: +49 7309 872-24 · www.bredent.com · @: info@bredent.com
REF 140 00961
REF 320WP4G1
REF 320WP4G5
REF 14000965
11

Publicidad

Tabla de contenido
loading

Tabla de contenido