Automatic Search - Avermedia AVerTV Hybrid STB 1080i Manual De Usuario

AVerTV Hybrid STB 1080i
OSD Menu
Search

Automatic Search

Manual Search
All Frequency Search
List
TV Program List
Radio Program List
Search
Use CH▲ or CH▼ buttons to select between Automatic Search,
Manual Search or All Frequency Search. Press Vol►/OK button to
make the selection.
Automatic Search:
Select "Automatic Search" and a warning message will appear. If you
want to overwrite the previous program list, select YES. Otherwise, select
NO. To abort this operation, simply select CANCEL.
The "Automatic Search" box will appear, indicating the scanning
percentage, Channel Number and Frequency. When scanning, active
TV/Radio programs will be listed inside the box. After channels are
scanned, the system will return to the real-time program automatically.
To terminate the scanning, press "EXIT".
Manual Search:
If there are any channels missing after auto scan, or you want to add new
programs, you can choose to manually scan the desired channels as
long as you have got the correct frequency and bandwidth data.
1. On the "Manual Search" page, select "Frequency" and
"Bandwidth" and press the numeric button or ▲/▼ on the
remote control to specify the correct frequency and
bandwidth. Then press OK.
If the certain frequency carries programs, the figures at the
NOTE
bottom of this page will show the percentage of strength
and quality.
2. After selecting "OK" and pressing OK, the system will begin to
manually scan channels.
3. When the channel scanning is completed, the system will
return to "Manual Search" page and bring you back to the
program you are watching earlier.
4. Repeat steps 1 to 3 if you want to scan more channels.
All Frequency Search:
Use the Automatic Search function first. If there are channels missing
after you perform Automatic Search, use All Frequency Search
function and repeat the searching process.
1. Select "All Frequency Search" and a warning message will
appear. If you want to overwrite the previous program list,
select YES. Otherwise, select NO. To abort this operation,
simply select CANCEL.
2. The "All Frequency Search" box will appear, indicating the
scanning percentage and frequency. All Frequency search
may take you a while, please be patient.
3. After channels are scanned, the syatem will return to the
real-time program automatically. If you want to interrupt or
cancel the scanning process, press any button, but this will
only memorize the scanned channel.
All Frequency Search is a very time consuming process. If
the default frequency table already includes all active TV
NOTE
channels in your area, then avoid using the All Frequency
Search.
List
Select "TV Program List" or "Radio Program List". All programs will be
listed in this page.
ENG-10
Description