Avermedia AVerTV Hybrid STB 1080i Manual De Usuario página 16

AVerTV Hybrid STB 1080i
On Screen Display
CH FINE TUNE
If the TV reception is not clear, choose CH FINE TUNE then press Vol◄
and Vol► buttons until the TV picture becomes clear.
FAVORITE CH
This function enables you to add, remove, reprogram or reassign the
33
TV channels with channel numbers that are easier to remember.
33
In the selected USER CH, enter the new channel number you want to
assign or the channel number you want to remove/add to the channel
line up. Then, in the CATV CH or TV CH, enter the channel number you
want to remap or the channel number you want to remove/add.
Use the CH▲ or CH▼ buttons to select ADD to include or DEL to
remove the channel number in the channel line up and then press
Vol►.
NOTE
RESOLUTION
Use the CH▲ or CH▼ buttons to choose from display resolution
settings then press Vol►/OK.
Under wide screen (16:9/16:10) mode, you can choose to view in 4:3 or
PANORAMA mode. Press Vol► to enter the sub menu.
OSD POSITION
Use the CH▲, CH▼, Vol◄, and Vol► buttons to move the frame where
you want to set the position of the MENU, then press MENU.
OSD TRANSPARENCY
Use the CH▲ or CH▼ buttons to choose from OSD transparency
settings then press Vol►/OK.
SET AREA
Press the MENU button, select MORE, select SET AREA in the MORE,
list items, use the CH▲ or CH▼ buttons to choose the appropriate
country signal, then press Vol►/OK button to make the selection.
If your country is not listed, choose another country with the same TV
system as yours.
LANGUAGE
Use the CH▲ or CH▼ buttons to select from different languages then
press Vol►/OK.
PIP TRANSPARENCY
Use the CH▲ or CH▼ buttons to select "YES" to enable the PIP
Transparency feature or select "NO" to disable this feature then press
Vol►/OK.
ENG-14
Usage
To browse through channels while setting the User CH
and CATV number, press the CH▲ or CH▼ buttons.