Dry Ironing; Steam Ironing - Beko SGA 8328 B Manual De Usuario

Ocultar thumbs Ver también para SGA 8328 B:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
2 Operation
WARNING
• You can do steam ironing at all
temperature levels except for "•"
A
setting. Press the steam trigger (3)
for steam ironing.
• Take the ironing instructions spec-
ified on the label of the fabric into
consideration for ironing.

2.6 Dry ironing

Your appliance will not raise steam as long as you
do not press the steam trigger (3).
In order to use dry ironing, do not press the steam
trigger (3).

2.7 Steam ironing

• Please note that the steam button
operates in intervals of 1 minute.
After 1 minute of operation the
steam function stops. To start
again hold the steam button.
• Operation of the pump may make
some noise during the water
C
drawing process; this is normal.
• The appliance starts in Smart
mode in the initial use. This level
offers safe temperature and
steam amount for all the fabrics
that can be ironed.
• Except for the "SMART" mode,
you may adjust other temperature
levels by using the control button
(2).
14 / EN
WARNING
• Your selection shall comply with
the type of the cloth to be ironed.
• While the iron is being prepared
symbol "
A
(1) is flashing, this means that
the base temperature is being
prepared to reach the selected
setting. When the iron is being
prepared symbol "
trol panel turns off completely, the
base temperature has reached the
selected temperature level.
• You can do steam ironing by using
the steam trigger (3) at all temper-
ature levels except for "•".
C
• When the appliance is ready for
ironing, move the iron horizon-
tally on the cloth to be ironed and
press the steam trigger (3). Your
iron will raise steam from its sole-
plate (11) as long as you hold the
steam trigger pressed.
2.8 Turbo mod
• Use the turbo steam feature for
more steam and for quick ironing
on thicker clothes.
C
• After running for 12 minutes at
Turbo level, the product will auto-
matically switch to the Max. level.
• To exit from the Turbo mode, press
the control button (2) for 3 sec-
onds.
Steam Generator / User Manual
" in the control panel
" in the con-

Publicidad

Tabla de contenido
loading

Tabla de contenido