Easypix W508 Manual De Instrucciones página 13

Auto power off :
1. Enter into Camera Mode, and press Up/Down button to
select " Auto power off".
2. Press OK button, and then press Up/Down button to
select Off , 1 Minute , or 3Minutes.
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.
Beep sound :
1. Enter into Camera Mode, and press Up/Down button to
select " Beep sound".
2. Press OK button, and then press Up/Down button to
select On/Off
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.
Language :
1. Enter into Camera Mode, and press Up/Down button to
select " Language".
2. Press OK button, and then press Up/Down button to
select a language, English, Deutsch, Français,
Español, Italiano, Português, Japanese, Simplified
Chinese, Traditional Chinese.
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.
Date Stamp :
1. Enter into Camera Mode, and press Up/Down button to
select " Date Stamp".
2. Please press OK button, and then press Up/Down
button to select Date/Time , Date , or off
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.
Frequency :
1. Enter into Camera Mode, and press Up/Down button to
select " Frequency ".
2. Press OK button, and then press Up/Down button to
select 50 Hz or 60 Hz
3. After selection, please press OK button to confirm, and
press Left button to exit. Or, select Right button to
return.
Format :
1. Enter into Camera Mode, and press Up/Down button to select "
2. Press OK button to format SD card.
3. Press Up/Down button to select Cancel or OK. After selection, please press OK button to
format, and then press Left button to exit. Or, select Right button to return.
12
Format ".