Easypix W508 Manual De Instrucciones página 7

Far shooting
slide the Macro/Far switch to
appears on the LCD screen, it indicates that the far shooting is on.
Flash
Press the Up button repeatedly until the
automatic flash.
Press the Up button repeatedly until the
flash function has been "forced on" (manual flash). If the flash is not ready, a LED will light up and
the icon will flash repeatedly - wait until the flash is ready before taking a photo.
Press the Up button repeatedly until the
is open.
Press the Up button repeatedly until the
Self-Timer :
You can include yourself in a photo by using this feature to delay the time between your pressing the
shutter and when the photo is actually taken. It is recommended that you use a tripod when you use
the self-timer.
1. Press Down button repeatedly to select
continuous shooting.
2. Press the shutter button to start a 2 or 10 or 3 pictures continuous shooting to count down,
and the photo will automatically be taken.
Delete :
You can delete the last photo you take on Camera Mode.
1. Please press Right button to enter into the menu, and press Up/Down button to select it.
2. Press OK button to confirm the selection, and press OK button to confirm the cancellation. Or,
select Left button to exit.
Menu:
You can set photo/video quality and change other setting.
Photo setting :
Press Menu/Left button to enter into the menu, and press
Up/Down button to select the setting. There are Resolution,
Scene, Image stabilization, Quality , Sharpness , Exposure,
White Balance , ISO and Face Detection.
position which is on the left side of the camera, until icon
icon shows on the LCD screen. This will activate the
icon appears on the LCD screen. This means the
icon shows on the LCD screen. The red eye reduction
icon appears. This will turn off the flash function.
or
OK button
6
seconds self timer or 3 pictures