Grandstream GXP2100 Guia De Inicio Rapido página 5

Tips For Using the Keypad:
Line Keys
Soft Keys
Mute
Transfer
Conference
Headset
Standard Keypad
Hold
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT buttons.
3. Press the round MENU button to confirm a menu selection.
4. The phone automatically exits MENU mode with an incoming call, the phone
goes off-hook or the MENU mode is left idle for 60 seconds.
PHONE CONFIGURATION:
Configure the GXP2100 using Web Browser:
1. Ensure your phone is powered up and connected to the Internet.
2. Press MENU button to go into menu of the phone.
3. Press the "down" arrow button to "Status" and press MENU button to see the
IP address.
4. Type the phone's IP address in your PC browser (See figure on right).
5. The default administrator password is "admin"; the default end-user password
is "123".
5
Message Waiting Indicator
Message
Volume
Navigation Keys
Menu/OK Key
Contact
Intercom
Multi-Purpose Keys
Send
Speaker
Configure the GXP2100 using the Keypad:
1. Make sure the phone is idle.
2. Press the "MENU" button to access the keypad MENU to configure the phone.
3. Select MENU-> Config, to configure settings for SIP Proxy, Outbound Proxy,
SIP User ID, SIP Auth ID and SIP Password.
4. Follow MENU options to configure the basic features of the phone. For ex-
ample: the IP address if using a static IP. For details, please check GXP21xx User
Manual.
5. Please contact your ITSP (Internet Telephony Service Provider) for additional
settings that may be necessary to configure the phone.
Note: For the detailed user manual, please download from:
http://www.grandstream.com/support
6