Listening To The Radio; Storing Manually - Sony XAV-W651BT Manual De Instrucciones

Listening to the Radio

Listening to the Radio
Tuning step setting is required (page 7).
To listen to the radio, press HOME then touch
[Tuner].
Reception controls/indications
 Current band
Opens the band list.
 Current frequency, program service name*,
RDS indication*
* During RDS reception.
 PTY (program types) (FM only)
Opens the PTY list (page 11).
 ZAP (ZAPPIN)
Helps to find a desired station by listening to
preset stations for a few seconds.

(option)
Opens the option menu.
 –SEEK/SEEK+
Tunes in automatically.
 /
Tunes in manually.
Touch and hold to continuously skip
frequencies.
 Preset numbers (1 to 6)
Selects a preset station.
Touch and hold to store the current frequency in
that preset.
10
GB
Storing automatically (BTM)
1
Select the desired band (FM1, FM2, FM3,
AM1, or AM2).
2
Touch .
3
Touch [BTM], then [Search].
The unit stores stations in order of frequency on
the preset numbers (1 to 6).
Tuning
1
Touch the current band.
The band list appears.
2
Touch the desired band (FM1, FM2, FM3,
AM1, or AM2).
3
Perform tuning.
To tune automatically
Touch –SEEK/SEEK+.
Scanning stops when the unit receives a station.
To tune manually
Touch and hold / to locate the approximate
frequency, then touch / repeatedly to fine
adjust to the desired frequency.

Storing manually

1
While receiving the station that you want to
store, press and hold the desired preset
number (1 to 6).
Receiving stored stations
1
Select the band, then touch the desired
preset number (1 to 6).
Searching for the desired station from
preset stations (Tuner Preset ZAPPIN)
Tuner Preset ZAPPIN helps you to find a desired
station by listening to preset stations for a few
seconds.
1
During radio reception, touch [ZAP].
Tuner Preset ZAPPIN starts, and subsequent
stations are received in sequence.
2
Touch [ZAP] again when the desired station
is received.