Dmx Linking - Colorist PANEL 36Qa Guía De Referencia Rápida

Colorist™ Panel 36Qa QRG
AC Power
Power Linking
IP65 Power
Cable Table
IP65 Power
Connector Pins

DMX Linking

DMX Connection
IP65 DMX Cable
Table
IP65 DMX
Connector Pins
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
You can link up to 6 Colorist™ Panel 36Qa products at 120 V;
11 at 208 V; or 12 at 230 V. Never exceed this number. Power linking cords
can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
Male Power IP65 Connector
When connecting the Colorist™ Panel 36Qa to local power, it may be
necessary to use the local-to-IP65 adapters supplied with this product.
The Colorist™ Panel 36Qa will work with a DMX controller using a regular
DMX serial connection.
www.iluminarc.com.
The Colorist™ Panel 36Qa uses a regular DMX data connection for its
DMX personalities: 4-CH, 6-CH, and 10CH. See the User Manual to
connect and configure for DMX operation.
Connection
Ground
Data +
Data -
Male IP65 (DMX Input)
To connnect the Colorist™ Panel 36Qa to your DMX network, it is
necessary to use the 3-pin to 5-pin adapters supplied with this product.
When not using the Power Output, DMX Input or DMX Output
connectors, you must seal the cable ends with the supplied caps.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
F
emale Power IP65 Connector
A DMX
DMX (U.S.) DMX (Europe)
Shield
Red
White
3
Brown
Blue
Primer is available
Shield
Brown
Blue
F
emale IP65 (DMX Output)
EN
IP65 Pin
1
2
3
from
IP65 Pin
1
2
3