Door Replacement; Feed Water Pipe Installation; Before Installation - LG SxS Guia Del Usuario

Ocultar thumbs Ver también para SxS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Pass the
Pass the refrigerator laterally through the access
refrigerator
door as shown in the right figure.

Door replacement

Mount them in the reverse sequence of removal after they pass through the access
door.

Feed water pipe installation

Before
Automatic ice maker operation needs water pressure of 147~834 kPa (1.5~8.5
installation
kgf/cm
Keep the total length of the feed water pipe tube within 8 m and be careful for the
tube not be bent. If the tube is 8 m or longer it may cause trouble in water feed
owing to the drain water pressure.
Install the feed water pipe tube at a place free from heat.
Connect to potable water supply only.
Warning
Refer to instructions with water filter kit for installation.
7
2
) (That is, an instant paper cup (180 cc) will be fully filled within 3 sec.).
Max
4
5
3
2
Min
1
2
1
TEMP
FRZ
TEMP
4
3
REF
Max
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Gr-p257stbGr-l257stf

Tabla de contenido