Introduction
Congratulations! You are the proud owner of the G.SKILL RIPJAWS KM570 series mechanical
gaming keyboard, designed with simplicity and fully packed with features.
Features
Cherry MX mechanical keyswitches
•
Full n-key rollover & 100% anti-ghosting keys
•
Per-key lighting & customizable lighting effects
•
Function combo keys
•
Dedicated volume control
•
On-the-fly macro recording & per-key macro support
•
Gaming mode Windows key lock
•
Braided USB cable design for durability and style
•
Five levels of ergonomically contoured keycaps
•
Technical Specifications
Model Number
Key Type
Illumination
On-board Memory
Polling Rate
Rollover
Cable Length
Warranty
Package Contents
G.SKILL RIPJAWS KM570 MX Mechanical Gaming Keyboard
•
Keycap Puller Tool
•
Quick Start Guide
•
Warranty Guide
•
System Requirements
Windows 7, 8, 8.1, 10
•
USB port
•
Installation
1. Turn on your computer.
2. Connect the keyboard USB connector to a USB 2.0 or USB 3.0 port.
3. Wait for the system to detect and install the basic device drivers.
4. Your keyboard is ready to use!
1 | ENGLISH
KM570 MX
Cherry MX Mechanical
Red
Yes (1 Profile)
1000Hz (1ms)
n-Key Rollover & 100% Anti-Ghosting
2.0m, Braided
2 Year Limited Warranty
Keyboard Hardware
2
1. "Fn" key
2. Function combo keys (use with "Fn" key)
3. Volume control keys (Mute / Volume Down / Volume Up)
4. Num Lock/Caps Lock/Scroll Lock/Windows Lock indicator lights
5. On-the-fly macro recording key ("MR" key)
6. Preset lighting brightness and speed control (use with "Fn" key)
Customize Lighting
The KM570 MX keyboard allows you to enable or disable the lighting of each individual key.
To customize single-key lighting, follow the instructions below.
1. Press "Fn + F8" to enter light customization mode. The Windows lock indicator light in the
top right corner of the keyboard will flash while in the light customization mode.
2. Press the key or keys you wish to enable or disable lighting. Key functions will be disabled
while in the light customization mode.
3. When complete, press "Fn + F8" again to complete the customization. The Windows lock
indicator light will stop flashing.
Note: By default, the QWERASDF, 1-6 keys, and space bar key will light up in the per-key light
customization profile. The per-key light customization profile is saved in the keyboard, and
can be accessed by pressing "Fn + F7" to cycle through the preset lighting patterns.
4
3
1
6
ENGLISH | 2
5