Moulinex Easy Soup LM841B10 Manual Del Usuario página 13

PROBLEMS
Poorly-mixed
preparations.
The appliance has
cut the electricity
supply.
Your appliance
continually beeps
and all the LEDs are
flashing.
The food is not
properly cooked or
something is caught
at the base of the
jug.
CAUSES
Pieces of food are too
large or too hard.
Stop the motor using
the motor overload
protector.
Appliance is damp.
Fouled up overflow sensor
(C)
Your appliance
equipped with a level
sensor (C).
Volume of ingredients
is too great.
You have not selected
the right programme.
Not enough or too
much liquid.
Ingredients not blended
properly.
You have used the
appliance to heat up
milk.
15
SOLUTIONS
Reduce the size or quantity of
ingredients processed.
Leave your product to cool
down for at least 20 minutes
and reduce the size or quantity
of ingredients processed.
Add liquid.
Leave the appliance to dry
for 24 hrs before trying to
connect again.
Clean the sensor (C)
is Reduce the quantity of
ingredients.
Do not exceed the maximum
level (fig 3) of ingredients.
Start again, choosing the
right programme.
Check that the liquid is
between the MIN and MAX
levels for settings P1 and P2
(fig 3).
For P3, ensure there is
between 150ml and 300ml of
liquid.
Stir the
i n g r e d i e n t s
manually (fig 4).
The soup-maker is not
appropriately-designed to
do this.
liquid and
t o g e t h e r
EN