X Rocker WILD - BEAR Manual De Instrucciones página 4

ENG
Turbo Mode Settings
Press the Turbo button and your choice of A/B/X/Y/L/R/ZL/ZR at
the same time to enable turbo mode for that button.
Automatic Turbo Mode
Press the already set turbo (A-ZR) and press the Turbo button to
complete the setting
NB. After setting Turbo or Automatic Turbo Mode, press the
button that you have set, the LED will flash while Turbo mode is
engaged.
Clearing Turbo Mode – single button
Press and hold the button you previously set into Turbo mode
Press the Turbo button twice to clear the setting
To clear automatic Turbo mode, press Turbo button once.
Clear all Turbo buttons
Press the Turbo and Minus (-) buttons at the same time to clear
multiple buttons from Turbo or automatic Turbo mode.
Increase/Decrease Turbo speed
The controller will default to standard Turbo speed. To adjust;
Press and hold the Turbo button
At the same time, press up or down on the right
analogue stick to increase/decrease the turbo Speed.
Charging
The 4 LED Indicator on the controller will show you what level of
battery charge you have remaining.
Fully Charged shows 4- full LED lights
When the battery is low, the LED lights will flash fast three times.
When battery is low, connect the USB Type-C Cable to the control-
ler and the dock as per wired mode.
You can continue playing while charging!