Technical Features - SILENTRON HABLO Manual Del Usuario

- by pressing SEL, pass to message 2, displayed by the red LED: position at will using SEL.
- transmit the programming code (see relevant instructions): one beep confirms entering, while 3 beeps indicate that
the appliance is already programmed or number 16 has been reached.
- press REC to escape programming
4) Programming Vocal Messages:
- Press the SEL key: the green LED relative to message 1 switches on. Flashing of led means "empty message"; fixed light means "recorded
message" : in this case delete by pressing ERASE until the LED switches off.
- by pressing SEL again, pass to message 2, displayed by the red LED. By pressing again go back to message 1.
- After 10 seconds of inoperativeness escape message programming automatically.
- Message 1 has duration of 10 seconds message 2 has duration of 20 seconds
- Select the message and record it, holding the REC key down.
- Press PLAY to listen to the recorded message.

5) TECHNICAL FEATURES

Power supply: 3 AA 1.5V batteries - Absorption 60 uA at rest, max 350mA when functioning
Autonomy: about 18 months with 10 sound broadcasts per month – low battery local signal
Functions: sound broadcast of two messages respectively of 10 and 20 seconds, repeated twice at every activation.
Displays and controls: 3 function control LEDs (see diagram)
Radio transmissions: coded at 64 bit - frequency and power in compliance with the law - range 100 m in free space
Dimensions -Weight - Container - Temperature: see figure
SILENTRON - Made In Italy
COPYRIGHT SILENTRON DF5535XB090723MF
7