3. Instructions for use
Main time zone "T1"
3.7
In position (p1) turn the crown to access the display "T1".
Display of the secondary time zone "T2"
When the "T1" display is shown, a short press of button
activates or deactivates the time zone "T2".
B
Note: The hands continue to indicate the main time
zone "T1".
Note: Adjustment of time zone "T1" or "T2" is not pos-
sible during the logging of a flight using the chrono
pilot functions.
INSTRUCTION MANUAL
Adjusting time zone "T1" or "T2"
1. Pull the crown out to position (p2). The hours display
flashes.
2. Turn the crown to adjust the values.
3. Press button
to switch between hours, minutes
B
and seconds.
4. Push the crown back to position (p1) to confirm the
settings.
Note: The same manipulation is applicable to "T2".
Switching between the 24-hour and 12-hour displays
1. With the crown in position (p2), a short press of button
activates or deactivates the "AM-PM" display.
A
2. Push the crown back to position (p1) to confirm the
settings.
Note: The same manipulation is applicable to "T2".
7