Phase Linear UCD200 Manual Del Usario página 10

OPERATING INSTRUCTIONS
Station Pre-Set Memories
11
To set any of the 6 pre-set memory buttons, use
the following procedure:
1. Turn the unit on and select the desired
band.
2. Select the first station to be pre-set using
the TUNE/TRACK buttons (7a and 7b).
3. Press and hold a pre-set button until you
hear a confirmation tone. The pre-set
number will appear on the display panel.
The station is now stored and can be re-
called at any time by momentarily pressing
that button.
Repeat the above procedure for the remaining
5 pre-sets for current the band. Six stations can
be stored for each of the bands.
Equalizer Selector (EQ)
12
The EQ button (12) applies preset sound
effects to the unit's audio output signal. When
pressed, it will activate one of the following
modes: "CLS", "POP", or "ROC". When the
Equalizer function is active, the bass and treble
levels can still be changed to accommodate the
listener's ear. When the EQ function is not
active, the unit returns to the user-set bass and
treble levels.
Display Selector (DISP)
13
This unit can display either the clock time or
radio frequency/CD player functions. Press the
DISP button (13) to display the time for
approximately 5 seconds. The correct time-of-
day can be set by pressing and holding the
DISP button. This procedure is explained in the
next step.
Setting the Clock
Press and hold the DISP button (13) until the
clock flashes in the display. Press the TUNE/
TRACK ( ) button (7b) to adjust the hour and
the TUNE/TRACK ( ) button (7a) to adjust the
RELEASE
/
PWR
12
EQ
AUDIO
SEL
AMS
10
minutes. Press the DISP button again to return
to radio frequency or disc play.
Mode Selector (MODE)
14
Press the MODE button (14) to change
between radio and CD player operation. The
current mode is indicated on the display panel.
During CD player operation, this button may be
used to change to radio without ejecting the
disc (the CD icon (
display to show that a disc is still loaded).
Press MODE again to return to CD player
mode.
UCD200
AM / FM / CD RECEIVER
1 2 3 4 5 6
SCN RPT RDM
11
UCD200
) will remain on the
7b 13 7a
EJECT
MON
DISP
TUNE
LOU
TRACK
BAND
MUT
MODE
14