Tabla de contenido
Publicidad
D
C
B
D
C
B
A
C
B
D
C
B
D
NUT2
NUT1
A
A
A
Step 3
Move the standoff based on the
module type and length.
The standoff is placed at the nut
location D by default. Skip Step 3
and 4 and go straight to Step 5 if
you are going to use the default
nut.
Otherwise, release the standoff
by hand.
Step 4
Peel off the yellow protective
film on the nut to be used.
Hand tighten the standoff into
the desired nut location on the
motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only fits in
one orientation.
Step 6
Tighten the screw with a
screwdriver to secure the
module into place. Please do
not overtighten the screw as this
might damage the module.
A88M-G/3.1
23
Publicidad
Tabla de contenido
