Multi-Level Security Arming (Security Only); Arming While Driving (Security Only); High Security Disarm (Security Only); System Override - Directed Electronics 474A Manual Del Usuario

• The full trigger alert icon (28) will turn on for 15 seconds.

Multi-level security arming (security only)

Multi-Level Security Arming allows you to select which of the system's
inputs or sensors will be active and which will be bypassed when the
system is armed. For more information, please refer to the expanded
version of this manual online at www.automatecarsecurity.com

Arming while driving (security only)

Your security system can be armed while driving the vehicle.
Press on the remote control for two seconds while the vehicle is
running. The siren/horn will sound once to indicate that the security
system is armed, and then once more to indicate that the ig ni tion is on.
The system will not respond to any input except the door triggers, and
the starter kill relay (if installed) will not be activated. Once you have
arrived at your des ti na tion, the system will disarm when the ignition is
turned off. The siren/horn will sound twice and the LED will then stop
lashing. The system can also be disarmed at any time by pressing

High security disarm (security only)

This security system offers High Security Disarm. High Security Disarm
is a feature that makes it possible to silence and reset the system while
it is triggering, without disarming the system. For more information,
please refer to the expanded version of this manual online at www.
automatecarsecurity.com

System Override

If your remote control is lost or damaged, you can manually disarm your
vehicle security system or disable an optional starter kill. To disarm or
disable the system without a remote control, you must have the vehicle's
ignition key.
16 © 2010 Directed Electronics. All rights reserved.