Switching Modes - Zehnder Deseo Verso Instrucciones De Uso

EN
Low Batteries
When the batteries' tension is lower than 2.2 V, the "Battery
symbol will be displayed for 3 seconds every minute in the clock
zone. The user will have to replace the batteries.
Both in case of replacement of the batteries and of disposal of the
remote control, batteries must be removed and disposed of in compliance
with applicable laws, as they are harmful for the environment.
Once the batteries are installed, the LCD display will be showing all symbols
for 1 second.
You can then set the date and time; the date will flash: the user can set the date
using the «+» or «-» keys.
Then press the «Mode» key; the hour will flash; set the time using the «+» or
«-» keys.
Press the «Mode» key once more; the minutes will flash; set the minutes using
the «+» or «-» keys.
Press the «Mode» button again to finish setting the Minutes and enter the
«Comfort» mode.
Setting
minutes
30
Day
adjustment
Hour setting
Initialized
remote
control

4.3 SWITCHING MODES

Once date/hour/minutes are set, the remote control will switch to "Comfort"
mode.
From the «Comfort» mode, by pressing the "Mode" button, the "Night" mode
will be activated.
Similarly, by pressing the "Mode" button again, the remote control's modes will
switch to: Comfort Mode – Night Mode – Antifreeze Mode – Clock Mode – Pilot-Wire
Mode – Comfort Mode.
Symbol Mode
Comfort
Antifreeze
Fil-pilot
Chrono
2 hr boost
Window
Stand-by
Comfort and Night Modes – setting of the mode's temperature
Go to "Night" or "Comfort" mode - use "Plus" or "Minus" buttons for temperature
setting: by pressing the "Plus" button once, the temperature will rise by 0.5 degrees, by
pressing the "Minus" button once, the temperature will drop by 0.5 degrees.
Temperature can be adjusted from 7 up to 30 degrees.
40019479 07/2019
Function description
The temperature of the appliance is controlled by
the "Comfort mode" settings
The temperature of the appliance is controlled by
Night
the "Night mode" settings
The temperature of the appliance is controlled by
the "Anti-freeze" settings
The temperature of the appliance is controlled by
the pilot-wire
The temperature of the appliance is controlled by
the mode of either the "comfort" or "night" programs
The appliance heats up the room at maximum
power
Lock Locks the keypad of the appliance
The appliance activates the "Window open" function
open
The appliance is not in operation
Eco Inactive on this device
ASC Inactive on this device
EN
31