Monitor; Wall Bracket; Mains Adaptor - THOMSON Smart Bracket II Manual De Instrucciones

ADDITIONAL MONITOR
9 Indicator light for connecting an additional

monitor

:
Red = Connection error
Blue = Connection OK or monitor not present
10
Power supply indicator light
Red = Connection error
Blue = Power supply connected correctly
11
Not used

4 - WALL BRACKET

The monitor is designed to be fixed to the wall. A wall bracket and the necessary fasteners are included.
5 - MAINS ADAPTER
A 230 Vac 50 Hz/15 Vdc 1A mains adapter for powering the monitor is included in the kit. Do not use other
power supplies as they could cause irreparable damage to the device and invalidate the warranty. Do not
cut or extend the wire of the mains adapter or the warranty will be void. The 15V wire of the adapter is
indicated by the presence of a red + 15V label. The ground wire of the adapter is indicated by the presence
of a black ENL label.
12 Intercom panel connection indicator light
not connected (wire unplugged or cut)*
Blue = connection OK
:
* This is completely normal if the monitor is
used as an additional monitor on an existing
installation and no intercom panel is directly
connected to it
B - PRODUCT DESCRIPTION
: Red = intercom panel
www.mythomson.com
EN EN
7