NORTH STATES 4929 Instrucciones página 3

Step 1: Unfold the 3-in-1 Superyard.
Figure 3
Step 3: Remove the ve
bars in both panels you wish
to connect. Turn clockwise to
loosen and pull down to
remove.
Figure 1
Lower hinge holder
al Step 4: Remove the
Socket Cap E.
Note: Keep for future
use as a barrier.
Step 2: Pos on and adjust the se ons to a
hexagon (Model 4929 should form an octagon) .
Turn se ons to align hexagonal mark with
arrow on opposite hinge (see Figure 2).
Note: The Superyard should be placed on a
flat surface.
Figure 4
Socket Cap-E
Step 5: To connect the panels
together, ve
allowing the upper and lower
hinge housings to slip into place in
the ma ng panel (See Figure 4).
Page 3
Figure 2
ally li one panel