Style selections BV-8636LT Manual Del Usuario página 8

INSTALLATION INSTRUCTIONS
Step 6: Adjusting the Levelers
NOTE: Clean area where the cabinet will be
permanently located prior to beginning installation,
ensuring the cabinet will not interfere with any water
supply and drain lines once mounted.
6a. With the help of another adult, carefully place
cabinet against the wall in its final location.
6b. Find and mark locations of wall studs behind the
permanent location of cabinet.
6c. From inside cabinet, drill hole through cabinet
mounting area into wall studs.
6d. Using mounting hardware (not included)
appropriate for your installation site, secure cabinet
to wall stud. If possible, secure cabinet to two wall
studs for increased stability.
WARNING:
Cabinet MUST be secured to wall studs.
NOTE: Use preassembled levelers on feet of cabinet base to level the item. Twisting the levelers
counterclockwise will increase the height of cabinet base, twisting them clockwise will decrease it.
Step 7: Aligning the Doors
If you need to adjust the doors, do so in the
following manner.
7a. To adjust the door up or down, loosen screws
(a) on both hinges, adjust door, and retighten
screws.
7b. To adjust the door left or right, turn screws(b)
on both hinges, in or out.
7c. To adjust the door in or out, loosen screws (c)
on both hinges, adjust door, and retighten screws.
6
7
8