Care And Maintenance - Style selections BV-8636LT Manual Del Usuario

CARE AND MAINTENANCE

SINK
Do
• After use, always rinse your sink with tap water to
dilute and remove deposits.
• Towel dry after use whenever possible to prevent
water spots. Should water spots occur, clean with
a mild solution of vinegar and water followed by a
thorough rinse.
• Use liquid soap, a general household cleaner, or a
weak solution of vinegar and water for regular
cleaning.
• Only use plastic scouring pads recommended for
use in stainless steel sinks, and only use them in
the bowl of the sink. Scrub in the direction of the
satin finish lines.
Do not
• Do not allow any food, detergent, soap or grease
to dry or sit for extended periods of time on the
surface of the sink.
• Never use abrasive cleaning products, as they
will dull and scratch the finish.
• Do not use scouring pads on the deck, as they
will dull the mirror finish.
• Never use steel wool pads, as they will leave iron
particles on the sink, which will cause corrosion.
• Never leave steel or cast iron pans in your sink
for extended periods of time, as this can cause
corrosion.
This sink is manufactured with the highest grade stainless steel and will provide you many years of
enjoyment with the proper care.
CABINET
Do
• Remove dust and dry dirt with a soft, damp cloth.
• Clean grease, oil, paint and ink stains with
isopropyl (rubbing alcohol). Immediately rinse with
water after stain removal.
Do not
• Do not allow your cabinet surface to come into
contact with products such as acetone (nail polish
remover), nail polish, dry cleaning solution,
lacquer thinners, gasoline, pine oil, etc.
• Use caution when using sharp instruments that
may fall and scratch the surface.
9