Drive RTL10555BL Manual De Instrucciones página 5

6. Attach the bag (D) to the seat frame by
rotating and removing the knobs located
on the front of the seat frame and sliding
the bag into the grooves located on the
inside of the frame. Replace the knobs to
secure in place. (Figure 6)
NOTE: Fold the I-Walker slightly to make
it easier to install the bag.
7. Attach the backrest (E) by sliding the
backrest hooks down into the receptacles
located on the front of the frame.
(Figure 7)
8. Attach the cane holder (F) to the side
of frame by sliding it down over the
receptacle located on the side of the
handle height adjustment buttons.
(Figure 8)
D
E
F
Figure 6
Figure 7
Figure 8