Simer BP3-A Manual Del Usuario página 4

Installation
Procedure
1. Install the Flow Sensor in the pump discharge.
To determine which is the pump discharge,
check flow direction which is indicated with
an arrow cast into the bottom of the pump.
2. Install the accessories that come with
the pump.
3. Mount the pump onto the pipe.
4. Ensure that the pump selector button is in the
OFF position.
5. Connect the pump to the electric power
source. The cable must be grounded. The
electrical connection must be completed in
compliance with local standards.
For parts or assistance, call Simer Customer Service at 1-262-728-5551
4
2