Steren SEG-510 Manual De Instrucciones página 10

Preparation
Place the box in a place where cannot be easily removable
It can be installed inside of a cabinet or mounted using a special bracket
Make sure to install it in a fl at surface, otherwise may fall down and
cause damages or injures.
Mounting method
The box can be mounted by the rear or the bottom side. Installation may
vary depending the place where you want to mount.
First locate the place where you want to mount the box, then use the
mounting pattern to mark the holes (can be at the bottom or the rear of
the box).
Use adequate screws for their mounting and avoid its detachment.
Input:
Material:
Dimensions:
Weight:
Product design and specifi cations are subject to change without Product design and specifi cations are subject to change without
previous notice. previous notice.
MOUNTING
SPECIFICATIONS
6V (4xAA)
Steel
13,53x9,8x9,8in
26,45lb
ENGLISH-10